12N BHL Steps - Statistics

General Stats

Answer Stats

Answer	% Correct
360° walkaround	100%
Adjust seat and work station	0%
Back drag-in float. Count from 1-100 to 3-1000, raise bucket at 4-1000 and again at 5-1000.	0%
Backfill trench	0%
Continue process until complete (park in open trench configuration)	0%
Dozer configuration when pushing from side (level-open-lower) 1/2" off ground	0%
Ensure bucket stays on ground-move forward between 1.5-2 pads	0%
Enter BHL and put on seatbelt	0%
Fully dump bucket and set dipper at 90°	0%
Fully extend boom, dipper, and bucket to make safety arc	0%
Lower boom until bucket teeth touch the ground	0%
Lower boom until slight lifting is felt	0%
Lower FEL until front wheels are 2" off ground	0%
Lower stabilizers-1800 RPMs	0%
Place spoil on uphill side of trench	0%
Push seat back and rotate	0%
Raise FEL and fully dump bucket	0%
Reconfigure BHL into travel configuration	0%
Reduce RPMs to 1200-alternate raising stabilizers 12'-raise FEL 12'	0%
Release boom and increase RPMs to 1800	0%
Release parking brake	0%
Repeat process until required depth reached	0%
Reset-pull parking brake-fully dump and lower FEL	0%
Scraper configuration	0%
Set bucket at 30° angle and make marking cut	0%
Set RPMs to 1200 and lower stabilizers until level with front	0%
Set up for pushoff	0%
Slowly push off with dipper	0%
Start engine	0%
Turn on pilot control switch	0%

Score Distribution

Percent of People with Each Score

Percentile by Number Answered

Your Score History

You have not taken this quiz